Epoxy Flooring Installation Services

Concrete Floor Polishing

Polished concrete uses progressively finer diamond tooling to refine the slab surface, then a chemical densifier to harden the concrete before the final polish passes. The result is a durable, low-maintenance floor with a sheen level specified in writing, from matte to high-gloss.

Epoxy Floor Maintenance

Epoxy floors lose their topcoat sheen and slip resistance before the base coat fails. Scheduled maintenance catches worn topcoat sections early, when a recoat is straightforward. The maintenance visit includes a slab condition check, surface cleaning, and a written assessment of any areas needing repair or recoat.

Epoxy Floor Repair

Cracks, chips, and delaminated sections let moisture reach the slab and spread damage to surrounding coating. Repair starts with removing loose material, profiling the exposed concrete, and applying a patch compound and topcoat matched to the existing system’s color and sheen.

Epoxy Flooring Installation

Every installation starts with an on-site slab assessment covering moisture, cracks, and surface condition. The written estimate then details each layer, surface profiling, crack repair, primer, base coat, and topcoat, before any work begins.

Flake Epoxy Flooring

Vinyl flake systems broadcast colored chips into a wet epoxy base coat, then lock them under a clear topcoat. The flakes add visual texture, hide minor surface imperfections, and provide light slip resistance. Flake size and color blend are selected before the written estimate is issued.

Garage Epoxy Flooring

Garage slabs take oil drips, tire scuff, and Phoenix heat cycling that weaker coatings cannot handle. The system includes diamond-grind surface profiling, crack repair, a moisture vapor barrier where needed, and a slip-resistant topcoat rated for vehicle traffic.

Metallic Epoxy Flooring

Metallic epoxy uses suspended metallic pigments manipulated during application to produce a marbled or lava-flow appearance. Each floor is unique because the pigment moves differently on every slab. Surface profiling and a clear topcoat are required to protect the effect and maintain the sheen long-term.

Polyaspartic Floor Coating

Polyaspartic coatings cure faster than standard epoxy and resist UV yellowing, making them well suited to Phoenix garages and covered patios that see direct or reflected sun. Surface profiling and crack repair still happen first, the fast pot life means prep must be complete before mixing begins.

Quartz Epoxy Flooring

Quartz epoxy systems broadcast colored quartz granules into a wet epoxy base coat, then seal with a clear topcoat. The aggregate layer adds texture for slip resistance and thickness for impact resistance. This system is common in commercial kitchens, restrooms, and pool decks where wet-surface traction is required.

Self-Leveling Concrete

Uneven or damaged slabs cause finish coatings to crack and pool water to collect in low spots. Self-leveling concrete is poured over the profiled slab, flows to a flat plane, and cures to a hard substrate ready for epoxy, polishing, or tile within 24 hours in typical Phoenix conditions.

Stained Concrete Flooring

Concrete stain penetrates the slab surface rather than sitting on top, so it cannot peel or chip like paint. Acid stain reacts chemically with the concrete for mottled, earthy tones; water-based stain offers broader color options. A sealer coat is applied after staining to protect the surface and control sheen.

Stamped Concrete Flooring

Stamped concrete uses pattern molds and integral color pressed into fresh concrete before it sets, creating the look of stone, slate, or tile without the material cost. A UV-resistant sealer is applied after curing to protect the surface from Arizona’s intense sun and seasonal moisture.