Skip to content

Aggregate System

Quartz Epoxy Flooring in Phoenix

A textured, slip-resistant surface that holds up to wet conditions, heavy foot traffic, and Arizona heat.

  • Written Estimate First
  • On-Site Assessment
  • Final Inspection
A clean, modern commercial kitchen featuring stainless steel appliances, work surfaces, sinks, overhead lighting, and speckled epoxy flooring.

What Goes Wrong

Where quartz epoxy jobs fail, and how to avoid it

The aggregate layer adds real performance, but only when the layers beneath it are done correctly.

Skipped Slab Prep

Broadcast aggregate over an unprofiled slab and the base coat peels, taking the quartz layer with it.

Profile Before Primer

The slab is mechanically profiled and all cracks are repaired before the primer coat is applied.

No Moisture Barrier

Older Phoenix commercial slabs often show vapor intrusion, skipping the barrier causes delamination within months.

Barrier When Needed

A moisture vapor barrier is specified wherever the slab assessment shows intrusion risk before coating begins.

Thin Aggregate Broadcast

A partial broadcast leaves low-texture zones that lose the slip resistance the system was specified to provide.

Full Saturation Broadcast

Quartz granules are broadcast at full saturation into the wet base coat, then excess is removed before topcoat.

Mismatched Topcoat

The wrong topcoat sheen or chemistry can dull the quartz color and reduce the surface’s chemical resistance.

Specified Topcoat Selection

Topcoat type and sheen are chosen alongside aggregate color and confirmed in the written estimate before work starts.

Aggregate System

Quartz epoxy floors built for wet surfaces and heavy foot traffic

The quartz layer adds both the slip resistance and the impact strength that a plain epoxy coat cannot match.

Request an Estimate

Quartz epoxy is a multi-layer system: a primer bonds to the profiled slab, a pigmented epoxy base coat is applied, and colored quartz granules are broadcast into the wet coat at full saturation. Once cured, excess aggregate is removed and a clear topcoat seals the surface. The result is a textured floor with measurable slip resistance.

Surface profiling and crack repair happen before the primer goes down, the same prep sequence as any epoxy system. A moisture vapor barrier is specified where the slab shows intrusion risk, which is common in older Phoenix commercial buildings. The quartz layer adds thickness that helps bridge minor surface irregularities, but it does not substitute for proper slab prep.

Quartz systems are specified for spaces where wet-surface traction is a safety requirement: commercial kitchens, restrooms, pool surrounds, and covered patios. The topcoat sheen and aggregate color are selected together, since the quartz color shows through the clear coat. The written estimate details aggregate color, topcoat type, and the cure time before the floor returns to service.

Why Choose Us

Why choose this service for quartz epoxy in Phoenix?

Quartz epoxy demands precise sequencing, from slab assessment through aggregate broadcast to final inspection. Here is what that looks like in practice.

Written Estimate Before Any Work

Every job starts with a written estimate listing each coating layer, crack repairs, and the projected timeline.

On-Site Slab Assessment

An in-person visit checks slab condition, moisture risk, and surface profile needs.

Aggregate & Topcoat Confirmed Upfront

Quartz color and topcoat type are agreed and documented before the first coat is mixed or applied.

Final Inspection at Completion

The finished floor is inspected against the original scope to confirm every specified layer was completed.

Phoenix Conditions Accounted For

Summer slab temperatures and monsoon moisture are factored into coat timing and moisture barrier decisions.

Tradespeople wearing spiked shoes apply a self-leveling floor compound or resin coating using a squeegee and roller in an indoor space.
A contemporary open-plan living space with concrete walls and polished concrete floor, featuring a central concrete fireplace and large sliding glass doors.

The Process

From first enquiry to a finished quartz epoxy floor

Request an Estimate

  1. 01

    Submit Your Details

    Describe your slab and space so an on-site assessment can be scheduled at your property.

  2. 02

    Review Your Estimate

    You receive a written estimate covering surface profiling, aggregate color, topcoat type, and cure timeline before booking.

  3. 03

    Installation & Inspection

    The installer completes each layer to spec, then a final inspection confirms the scope was fully delivered.

Pricing Estimates

Typical Quartz Epoxy Flooring Prices

Project typeTypical cost
Small garage floor$2,500-$4,000
Standard 2-car garage$4,000-$7,500
Large decorative floor$7,500-$12,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about quartz epoxy flooring in Phoenix

  • How long does a quartz epoxy floor take to cure before we can use it?

    Light foot traffic is typically possible within 24 hours of the final topcoat. Full cure for heavy loads or vehicle traffic takes around 72 hours. The written estimate states the exact cure schedule for your specific topcoat product and the conditions on the day of installation.

  • Can quartz epoxy be installed over an existing concrete slab with cracks?

    Yes, but cracks must be repaired and the slab profiled before the primer goes down. The quartz layer adds thickness that bridges minor surface irregularities, but it cannot compensate for structural cracks or a slab that has not been properly prepped. The on-site assessment identifies what repair work is needed.

  • What happens if we skip the moisture vapor barrier on a Phoenix slab?

    Vapor pressure from below pushes through the epoxy bond, causing bubbling and delamination, sometimes within weeks of installation. Older Phoenix commercial slabs are particularly prone to this. The installer tests for moisture intrusion during the assessment and specifies a barrier if the slab requires one.

  • Can we choose the quartz color and topcoat sheen?

    Yes. Aggregate color and topcoat sheen are selected together because the quartz shows through the clear coat. The written estimate lists the chosen aggregate color and topcoat type so both parties agree on the finish before installation begins.

  • Is quartz epoxy suitable for an outdoor pool surround in Phoenix?

    It is commonly specified for covered pool surrounds and patios. UV-stable aggregate colors resist fading, and the textured surface handles bare feet and standing water. Fully exposed outdoor areas should be discussed at the assessment, since direct UV exposure affects topcoat selection.

  • How do we maintain a quartz epoxy floor after installation?

    Routine cleaning with a neutral-pH cleaner and a mop is sufficient. Avoid abrasive scrubbers that can dull the topcoat over time. The final inspection confirms the recommended cleaning products for your specific topcoat.

More questions about Quartz Epoxy Flooring?

Tell Us About Your Floor

Describe your slab and we’ll schedule an on-site assessment, put a written estimate together, and get the work scheduled.

Request an Estimate