Ongoing Care
Keep your topcoat intact and your floor performing, before wear reaches the base coat.
What Goes Wrong
The difference between a one-day topcoat and a multi-day tear-out is usually a few missed inspections.
Once worn topcoat sections are left unaddressed, moisture and grit reach the base coat and cause delamination.
Catching worn zones while the base coat is still sound means a fresh topcoat bonds directly, no removal needed.
Verbal-only assessments leave floor condition undocumented, so gradual wear goes unnoticed until failure is obvious.
Each visit produces a written assessment naming worn zones, micro-cracks, and any recoat or repair work recommended.
Tracked-in moisture and grit after monsoon season accelerate topcoat wear at entries and garage thresholds.
A post-monsoon maintenance check catches threshold and entry damage before it spreads to the wider floor area.
Residual contaminants from improper cleaning prevent a recoat from bonding, forcing a full surface re-profile instead.
The slab is cleaned to a standard that allows a recoat to bond, not just to a standard that looks clean.
What’s Included
Each visit covers the full condition of the floor, not just the area that looks worn.
Worn topcoat sections are identified and a fresh slip-resistant layer is applied over the sound base coat.
Micro-cracks, adhesion loss, and moisture intrusion points are logged before they develop into base coat damage.
Surface cleaning removes oils, grit, and chemical residue that would prevent a recoat from bonding correctly.
A written report after each visit documents current floor condition and any repair or recoat work recommended.
Topcoat and threshold checks for residential garage slabs.
Scheduled visits for retail, warehouse, and workshop floors.
Targeted inspection after Phoenix monsoon season each year.
Why Choose Us
On-site assessments built around Phoenix slab conditions, with every visit documented in writing.
Scope, coating layers, and timeline are listed in writing before a single task is scheduled.
Every enquiry starts with a physical inspection, no remote quoting from photos or descriptions.
A close-out inspection confirms the agreed scope was completed before the visit is signed off.
Monsoon timing and UV exposure cycles affect when maintenance is most effective.
Each written assessment builds a record of the floor’s condition over time, not just a one-off snapshot.
The Process
01
Tell us the floor type, age, and any visible wear so we can schedule the right assessment for your slab.
02
The visit inspects the slab, and a written estimate covers cleaning, recoat scope, and timeline.
03
The maintenance work is carried out and a final inspection confirms the full scope was completed as agreed.
Pricing Estimates
| Service | Typical cost |
|---|---|
| Cleaning and inspection | $150-$300 |
| Minor touch-up and reseal | $300-$800 |
| Recoat and refresh | $800-$2,000 |
Describe your slab and we’ll schedule an on-site assessment, put a written estimate together, and get the work scheduled.