Skip to content

Decorative Epoxy

Metallic Epoxy Flooring in Phoenix

A flowing, three-dimensional surface that changes with the light, no two floors look the same.

  • On-Site Assessment
  • Written Estimate
  • Final Inspection
A modern living room featuring a striking blue and white epoxy resin floor, dark grey walls, a black sectional sofa, and a tiled fireplace.

What Goes Wrong

Where metallic epoxy jobs fail, and how to avoid it

The visual effect is only as good as the prep work underneath it.

Skipped Profiling

A smooth, unground slab blocks adhesion, the metallic layer peels within months of installation.

Open the Surface First

Mechanical profiling opens the concrete pores so the primer and base coat bond at the slab level.

Cracks Left Unfilled

The translucent metallic coat magnifies every crack and void, surface defects show through the finished floor.

Repair Before Priming

Crack repair is completed before the primer goes down, so the metallic layer sits on a flat, clean surface.

Heat-Rushed Coats

Phoenix slab temperatures shorten pot life, coats applied too fast trap bubbles and kill the swirl pattern.

Time Coats to the Slab

Application is scheduled around cooler parts of the day so each coat flows and sets at the right pace.

No Protective Topcoat

The metallic base coat alone has low abrasion resistance, foot traffic dulls and scratches the effect quickly.

Seal with a Clear Topcoat

A clear topcoat in matte, satin, or high gloss locks in the pattern and carries the floor’s wear resistance.

Decorative Epoxy

Metallic epoxy floors with a finish that cannot be replicated twice

The visual effect comes from how the pigment moves during application, slab prep determines how well it holds.

Request an Estimate

Metallic epoxy suspends fine metallic pigments in a clear or tinted epoxy base. During application, the installer manipulates the wet coat with air or tools to create swirling, three-dimensional patterns. No two floors look identical, because pigment movement depends on the applicator’s technique and the slab’s surface texture.

Surface profiling is critical for metallic systems, a smooth, open concrete surface lets the pigment flow evenly and bond without fisheyes or voids. Crack repair happens before the primer goes down, because any surface irregularity shows through the translucent metallic layer. Phoenix slab temperatures affect pot life, so application timing is planned around cooler parts of the day.

A clear topcoat seals the metallic layer and determines the final sheen level, matte, satin, or high gloss. The topcoat also provides the abrasion resistance the metallic base coat alone cannot deliver. The written estimate specifies the pigment color, topcoat sheen, number of coats, and cure time before the floor can be used.

Why Choose Us

Why choose this service for metallic epoxy in Phoenix?

Every job is backed by a documented process, from the first slab assessment to the final sign-off.

Written Estimate Before Any Work Starts

The estimate lists every coating layer, pigment color, and cure time, nothing is left vague before you commit.

On-Site Slab Assessment Included

A visit checks slab condition, moisture, and surface profile before pricing the job.

Crack & Surface Repair in Scope

Crack repair and surface profiling are built into the job plan, not added as surprises on installation day.

Phoenix-Specific Scheduling

Coat timing accounts for Arizona slab temperatures so pot life is managed and the finish sets correctly.

Final Inspection at Completion

A walkthrough confirms every item in the written scope was completed before the job is signed off.

Tradespeople wearing spiked shoes apply a self-leveling floor compound or resin coating using a squeegee and roller in an indoor space.
A contemporary open-plan living space with concrete walls and polished concrete floor, featuring a central concrete fireplace and large sliding glass doors.

The Process

From first enquiry to finished floor

Request an Estimate

  1. 01

    Submit Your Details

    Tell us about your slab and we schedule a visit to assess the surface condition.

  2. 02

    Review Your Estimate

    You receive a written estimate covering surface profiling, crack repair, coating layers, sheen level, and cure time.

  3. 03

    Installation & Sign-Off

    The installer completes the work to the agreed scope, then a final inspection confirms everything was delivered.

Pricing Estimates

Typical Metallic Epoxy Flooring Prices

Project typeTypical cost
Small decorative room$2,500-$4,000
Standard room floor$4,000-$7,000
Large premium floor$7,000-$12,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about metallic epoxy flooring in Phoenix

  • Can I choose the color and sheen level before the work starts?

    Yes. The written estimate specifies the pigment color and topcoat sheen, matte, satin, or high gloss, before any work is scheduled. Changes after application begins are not possible, so the color selection is confirmed at the estimate stage.

  • How long before I can walk on the floor after installation?

    Light foot traffic is typically possible within 24 hours, but the topcoat needs 72 hours before furniture or heavy loads are placed on it. Your written estimate will state the exact cure time for the specific products used on your job.

  • What happens if I delay fixing a cracked slab before coating?

    Cracks left unrepaired telegraph through the translucent metallic layer and worsen over time as the coating flexes. Repairing the metallic coat after installation costs significantly more than filling cracks before the primer goes down.

  • Is metallic epoxy suitable for garage floors in Phoenix?

    Yes, but the slab must be tested for moisture vapor transmission first. Phoenix monsoon season raises ground moisture, which can cause delamination if a moisture vapor barrier is skipped. The on-site assessment checks for this before any coating is specified.

  • Will the pattern look the same as a photo I saw online?

    No two metallic epoxy floors are identical. Pigment movement depends on the application technique and your slab’s texture, so the result is always unique. A general style can be targeted, marbled, lava-flow, or cloud, but an exact match to another floor is not possible.

  • How do I maintain a metallic epoxy floor?

    Sweep or dust-mop regularly and clean spills with a pH-neutral cleaner. Avoid abrasive scrubbers, which scratch the topcoat. The topcoat is the protective layer, if it dulls over years of use, it can be recoated without stripping the metallic base coat underneath.

More questions about Metallic Epoxy Flooring?

Tell Us About Your Floor

Describe your slab and we’ll schedule an on-site assessment, put a written estimate together, and get the work scheduled.

Request an Estimate